Pro-Ject: Vinyl NRS Box S3 (Noise Reduction System)
$399.00
<h4>đLAB POINTS</h4> <ul> <li>vinyl noise reduction system detects and reduces vinyl crackle via algorithmic noise reduction system (NRS)</li> <li>connect between your phono preamp and amplifier / power speakers</li> <li>the unit will automatically activate when signal is detected unless bypassed</li> <li>(2) de-crackling intensity algorithms, can be fine-tuned via front panel knob</li> <li>instant feedback via front panel LED</li> <li>24-bit DSP / 96 kHz sampling rate for precise processing</li> <li>line-level operation</li> <li>full aluminum housing</li> <li>available in silver or black</li> </ul> <p class="faq-quote">"Connect the output of your phono preamplifier to the Vinyl NRS Box S3. First, the line signal gets digitized with a bit depth of 24-bits and a sampling rate of 96 kHz. If the input is too loud, the overflow LED will show it to you. You can then activate the -6 dB switch and the gain is fine now. Crackling parts can be reduced by up to 8 dB which is a big improvement for the listening experience. You can easily adjust the sensitivity with the potentiometer on the front. If you donât want to use the De-Crackling function, just turn the potentiometer completely to the left and the algorithm is in bypass." - Pro-Ject</p> <h4>đTECH SPECS</h4> <ul> <li>Internal sampling: 96 kHz/24 bits</li> <li>Internal processing: 56-bit accumulator, double precision</li> <li>Frequency response 20Hz to 20 kHz: -0,6 dB / +0,1dB</li> <li>Frequency response 30Hz to 20 kHz: -0,2 dB / +0,1dB</li> <li>Clip indication: -0,6 dB below real clipping</li> <li>Bypass mode: galvanic linked together (Rlink<0,3 ohm)</li> <li>THD: <0,009% (500 mVrms Input Level)</li> <li>VNRS noise/rumble reduce: up to 8dB (20Hz to 20 kHz)</li> <li>De-Click reduce (basic): 8 dB (3kHz to 20 kHz)</li> <li>De-Click reduce (intensity): 12 dB (2kHz to 20 kHz)</li> <li>Outboard power supply: 18V/500mA DC, suitable for your country's mains</li> <li>supply</li> <li>Power consumption in standby: 0W OFF/Standby, 2.2W ON (without outboard power supply)</li> <li>Dimensions: WxHxD: 4" x 1.5" x 4" / 103 x 37 x 104 mm</li> <li>Weight: 0.75 lbs / 340 g</li> </ul> <h4>đŠCOMES WITH</h4> <ul> <li>power supply</li> </ul>